7-Cup Food Processor Work Bowl Compatible with Cuisinart DLC-10 Series,FP-631AGTX-1,NOTE:This bowl features 2 tabs on the top rim of the workbowl
46.99
7-Cup Food Processor Work Bowl Compatible with Cuisinart DLC-10 Series,FP-631AGTX-1,NOTE:This bowl features 2 tabs on the top rim of the workbowl
· Note：This bowl features 2 tabs on the top rim of the workbowl. This work bowl will not work with a Tritan workbowl cover. · Note：If you have a Tritan workbowl cover you will need to order the 4 tabbed part number FP-631AGTXT-1. · Fits Models：DLC-10, DLC-10P, DLC-10E, DLC-5, DLC-10S, DLC-10C, DLC-10SCH, DFP-7 · Note：When you buy, look at the edge of your food processor bowl to see if the locking orientation is two tabs or four tabs.Food mixers have evolved over time. The model is the same, but the direction of the lock bowl is different! A lot of 80/90 machines are still working and there will be an error changing the work bowl. The difference between them is two tabs and four tabs. · High-Quality：The working bowl is made of high-quality plastic, with good quality, falling resistance, heat resistance, cold resistance and long service life.
Related products
ziggy vReviewed in the United States on April 3, 2025
My food processor had been a trooper over the years, but the work bowl finally cracked and was unusable. I hoped that I could find a replacement and I did! This work bowl fits perfectly. It is a little tight the first few times locking and unlocking into place for usage. Just keep putting it into position, and removing it. Go gently, it will get easier by the 5-7 time. Mine now works as seamlessly as the original and is such a delight! Super happy that this was available and works so well.
JFReviewed in the United States on September 15, 2024
Although advertised as fitting on the Cuisine DLC-10 series, when I tried this as a replacement bowl on my Cuisinart of that series, this bowl hardly fit and then broke immediately when I tried to take it off. It thus does not work as advertised and is a total waste of money.
Paula RReviewed in the United States on March 30, 2025
Works well. After getting the wrong part through the product company was able to get it at Amazon
RonGReviewed in the United States on May 2, 2024
This item worked perfect on our old Cuisinart food processor. It fit a little snug with the top unit, but remember, all the surfaces a new on the replacement and not worn like the old one is.
CWReviewed in the United States on December 8, 2024
The fit is a little tight but it works with the original lid and blade. You just need patience and a gentle hand when seating the bowl and locking the lid into place, and vice versa. The bowl does not appear to be the same material as the original bowl and is a little thinner, so I can't comment on its quality and durability.
Amazon CustomerReviewed in the United States on September 17, 2024
Pros: It fits perfectly and gave new life to my old food processor. Cons: At $48 it's ridiculously expensive for a piece of plastic When ordering make sure to read the description on what models it fits.
Kindle CustomerReviewed in the United States on January 8, 2025
This is a cheap quality replacement. The plastic is very thin and it does not slide smoothly into place. The cost is not justified considering it would probably break unless you are very careful with it.
Linda StickelmeyerReviewed in the United States on April 23, 2025
Doesn’t fit
Adam KirbyReviewed in Canada on April 2, 2025
Fit my Cuisinart well
RobertReviewed in Canada on December 23, 2024
I got this for my Cuisinart DFP-7, whose bowl was broken. This bowl has 2 tabs on top which fits my lid. Works great!
SelenaReviewed in Canada on July 29, 2024
This bowl does not fit to DLC-10E work bowl as advertised. The Pictures presents my food processor which is DLC-10E. One that i received is too tight and can't be placed using normal hand strength force. It is Advertised is as compatible to DLC-10E.
ginette noelReviewed in Canada on April 13, 2024
Pour remplacer le bol que j’avais avec mon robot
Deborah Benoit AsplerReviewed in Canada on July 17, 2024
Bought my Cuisinart probably 30 years ago! The motor is extraordinary and the only thing I have replaced is the bowl! Thank you for continuing to supply them