product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 110V/220V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT

289.99

Save 22%

ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 110V/220V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT

4.5

500+ bought in past month

Highest ranking 101

13 comments

$289.99

Save 22%

· CUTTING THICKNESS UP TO 20MM: Featuring a brand-new MCU technology upgrade, the plasma cutter machine has a high degree of internal integration, combining full digitalization for more precise control of cutting parameters such as current and voltage. This results in better cutting effects and improved stability. Cutting thickness: Quality 12mm (1/2"), maximum 20mm (3/4"). · PILOT ARC FUNCTION: The CUT55 Pro plasma cutters features a high frequency non-touch arc starting mode. Arc initiation without contact allows for cutting steel surfaces with dirt, rust, or coatings without affecting cutting performance. This greatly facilitates user operation and, since it avoids contact with the workpiece, helps to prevent torch damage and extend its lifespan. · APP CONTROL: Enables easy interaction with the plasma cutter welder combo via APP. Allows parameter adjustments, real-time monitoring, and status detection from up to 50 meters away. Users can choose cutting processes, save settings, and access FAQs, making it ideal for beginners and for ongoing maintenance. · 2T/4T & INTELLIGENT POST-BLOW: 2T mode is suitable for flexible cutting, while 4T mode helps alleviate fatigue from prolonged operation. Cutting current 20-34A, post-blow time 5s; Cutting current 35-45A, post-blow time 8s; Cutting current 46-55A, post-blow time 10s. No manual adjustment of post-blow time is required, making it more convenient. · ONE MIN START CUTTING: Equipped with a pre-installed air regulator & filter for quick installation in 1 minute. It includes a high-quality filter pressure regulator that allows for rapid adjustment of air pressure, while filtering out water, oil, and impurities from the gas to ensure clean air and stable pressure. · SAFETY AND DURABILITY: Equipped with a smart fan and advanced cooling system that cuts noise by 50%, doubles cooling efficiency, and extends machine life by 50%. Waterproof, dustproof, and corrosion-resistant, it lowers failure risk by 70%. Features VRD function, fault alarms, and protection against overcurrent, overvoltage, overload, and overheating. Certified by TÜV and ANSI.

Related products

Reviews From
avatar

GreywolfReviewed in the United States on February 11, 2025

Nice little unit. Works good. Hope it holds up. Easy to set up and to use. Great price for what you get.

avatar

DanielReviewed in the United States on February 2, 2025

Just want to say I was pleasantly surprised when I fired this little guy up, it cuts great 1/2 inch cuts like it's 1/4 definitely beats torch work only thing that sucked is the air hook up, they should have just used a regular air fitting not the barbed one tried to remove barb but was afraid I was gonna snap the regulator so I just Put a short piece of hose on and put a male end on it so I could hook to my airline like every normal tool does. Other downfall is it says wait till fan shuts off to start cutting and for an impatient guy like myself 4 minutes seems like forever to continue working but I'll get over it, it cuts super nice!!!

avatar

Motorcycle FredReviewed in the United States on January 24, 2025

Small....portable and very powerful is what I have to say. Outperforming much more expensive units with ease. An incredible value is what this is. Simple to setup and easy to operate.

avatar

William N CordleReviewed in the United States on February 12, 2025

Only reason for giving four stars is because my first one arrived with a bad ground, and couldn’t sustain an arc. Returned it, and still awaiting my refund. Second Quam is that the second unit I ordered is a completely different unit. The outer case is a completely different shape and design. So I am suspecting that the original order was not the right machine in the first place. But for the function of the machine, it works absolutely flawlessly. Have not tried it on 110 yet, but I would suspect as usual it would be fairly limited. Tried it on 220 off of an inverter generator and cut through half-inch steel like butter. Set up was very easy, and straightforward. However, I will say that the Bluetooth functionality is absolutely worthless. You’re standing right at the machine, turning it on anyways, having to dig through your phone to get into the settings just is an unnecessary step and it’s only purpose is to report the metrics back to Arccaptain.

avatar

JohnReviewed in the United States on February 26, 2025

Very nice plasma cutter for a great price.

avatar

Ashley SnyderReviewed in the United States on February 22, 2025

Very happy with price and its ability to cut very clean.

avatar

Doug PyperReviewed in the United States on March 9, 2025

This machine is awesome easy to use for beginners. Easy to hook up and use

avatar

Jim BoydReviewed in the United States on December 4, 2024

I rarely review products that I purchase on Amazon as I never seem to have the time to do so. I’d been looking for a moderately priced plasma cutter but didn’t really see what I was looking for. I had previously owned a plasma cutter, but it and my entire home and shop was destroyed in the 2018 Camp Fire in Paradise, CA. After looking at the numerous positive reviews for this Arc Captain plasma cutter, I was curious to learn more! I have purchased other items from Arc Captain and had been pleased with those purchases. I watched a ton of YouTube videos and I liked what I saw. Three year warranty, great customer service. I bought the plasma cutter and it was delivered very promptly to my home. Packaging was excellent and the unit appeared to be pristine with no obvious dents or dings. After unboxing I went to hook up my air compressor line. How was I supposed to hook up this supplied 1/4” red tube to my existing quick connector line? I tried removing the barb fitting from the unit but it wouldn’t come out. So I found an awkward but yet effective way to make a solid air connection. I only had 120 volt power available so I used that to attempt to cut a piece of 1/8” steel. It wouldn’t cut it! I tried all sort of variations with air psi and amperage’s settings, tried it on rusty steel, brand new steel ground lightly to ensure I had a good grounding point. Nothing worked. Yes I read the operator’s manual several times to no avail. Over a course of several weeks I sent 6 emails to customer support. They were very polite and seemed very caring but all they offered me was to try solutions that didn’t work or I had already tried. Finally they suggested that my torch could be defective and that they would send me a replacement. I realized that my 30 day window for a return to Amazon was closing in on me. What if I waited to receive a new torch and that wasn’t the solution? I returned the unit to Amazon and got a refund. I found a more powerful unit for less money named Silatu. This worked perfectly out of the box. Guess what, there were air adjustment controls on the front panel as well as a quick connect on the back panel that hooked up instantly to my compressor air line. Buyer beware!

avatar

Auto MDReviewed in Canada on March 14, 2025

READ THE MANUAL BEFORE USING. ONCE SET PROPERLY THIS IS A VERY PROFFESIONAL PLASMA CUTTER

avatar

Tyler McIntyreReviewed in Canada on March 14, 2025

This little unit is 10/10 cuts 1/4” plate like nothing. Clean cuts.

avatar

DReviewed in Canada on November 17, 2024

Cut great easy to use worth the money

avatar

JohnGReviewed in Canada on February 25, 2025

Works like a charm. Cuts through steel like butter. Great price too.

avatar

Francis BolducReviewed in Canada on February 25, 2025

Super j aurais du avoir ca avant