Holds the phone well and sticks to the dash amazing!! Highly recommend this mount

This product has been solid for over 6 months including the tail end of summer and I'm purchasing another one. There are many 1-star reviews of people complaining about the charger falling off the dash. After preparing the surface (small section of dash) with mineral spirits (can use 99% isopropyl alcohol) the 3M pad adhered instantly and is not going anywhere.

It holds the phone with MagSafe mostly ok, but if you hit a pothole it could fall off. The biggest problem with all these is my phone overheats like crazy. It may be better to get one that clips on to your AC vent. It will stay cool that way. With this one you could position it so your phone is lowered on to the vent.

Installed as instructed, but going over small bumps and railroad tracks made the suction cup disconnect from the base- even without a phone on the magnetic holder. After that, arm started to disconnect on its own. I timed it from the time I connected the suction cup to the base- less than a minute and a half to disconnect on its own. Don’t recommend this one currently, which is a shame as I’ve always had great luck with Anker products before now.

Anker makes amazing high quality products.

I have been searching for wireless charging solution for my 2016 MINI Cooper for some time now that would put the phone in my visible line of sight (currently the only solution has been cup holder-based chargers). When I recently got an iPhone 13 Pro and saw one. of my favorite brands, Anker had a MagSafe compatible dash-mounted solution, I was really excited and waited for the product to go on sale. I bought it, and despite having a higher price (even on sale) than other similar wireless chargers, I knew that Anker would be worth the extra investment. Or so I thought - unfortunately, two major issues hamper this device from being the ideal solution for those looking for a wireless charging device for their car: 1. Despite having a "powerful" magnet, this was unable to reliably support the weight of an iPhone 13 Pro. I think a lighter phone like an iPhone Mini 12 or 13 might not be as heavy and not cause the magnet to fail when the car inevitably hits bumps in the road, and not even major ones - even uneven concrete dislodged it several times and thank goodness I had a case on the phone to protect it. Now, I know what you're going to say - the case weakened the magnet (and you'd be right) - the case (a Spigen clear case that only adds 0.3 mm to the thickness of the phone) did weaken the magnetic grip a bit, but I also tried it sans case and still managed to get dislodged by bumps in the road. The fact the magnet is on the end of an arm exacerbates this, as the weight of the phone will cause the arm to flex and bounce, which will aid in dislodging the phone. I think if Anker could (depending on if it's technically possible) use a neodymium magnet(s), this might improve this scenario. 2. Like a lot of these dash or window-mounted arms, this uses a suction cup with a lever to clamp down the suction cup. Anker even includes a thick rubber mounting surface (with very sticky 3M adhesive on the back) to mount to your dash. I cleaned the dash surface (which has a light pebbly texture) and applied the mounting surface, careful not to touch any parts after peeling off the protective film from the surface and the suction cup, and mounted it. For several days I watched it carefully as I drove, to see if the surface or the cup would give out first. Unfortunately, the cup gave out first, and slowly disengaged (while holding my phone) and that was it for me. After several failures of the magnet dropping my phone unexpectedly while driving, and now that suction cup failure after only several days, I cannot recommend this product and will have to go back to my cup-mounted wireless charging cradle which will unfortunately force me to look down for maps, etc. while driving (MINI Coopers didn't get CarPlay until the 2020 models, and mine is a 2016 so that is unfortunately not a solution for me but that isn't Anker's fault). Hopefully Anker will see this review and note these issues and come out with a superior version that addresses these shortcomings so I can consider this product potentially in the future.

...and I'm still in the phase where I can't get anywhere without using GPS so having a good mount that is up near enough to the windshield for me to see the screen without blocking my view of the road is critical. Since GPS sucks battery mercilessly, the fact that it's a MagSafe charger keeps my iPhone happy, too! I'm a huge fan of Anker products, using their power and hub solutions throughout my house and my workstation, I even have a power station from Anker that I take camping. When I realized that I needed a mount to tide me over until I buy my new car with Apple CarPlay, there was no question that I'd look for an Anker solution!

The charger itself worked very, very well and was a breeze to set up. Sadly the sticky pad lost grip on the dash in just under 60 days. I tried the backup pad but that too failed almost immediately. Now I’m outside the return window with a charger I can’t use.

The packaging is cool, the magnet is strong as advertised, I can go over speed bumps and rough roads without my phone falling off, the charging is pretty fast, 40-100% in 20 minutes, and the glue for the mounting plate is quite strong but doesn't damage the dash

👍

Great item. Worth the money. Works well. Only have to lift it up every 2 weeks as the iphone pro max is too heavy

Good quality products bit expensive but satisfied.

I bought this product as I had a good experience with Anker’s product ms before. It was not cheap but past results of their cables and power bank made me believe it will be good one that going to serve me for many years. I was wrong !!! After 6 months the product broke - the vacuum rubber broke from that plastic case. Probably last time I’m going to buy any ok Anker’s products