· Broad Compatibility: Besign LSX6N Laptop Stand is compatible with all laptops from 10''-15.6'', such as Air 13, Pro 13 / 15 / 2018 / 2017 / 2016, Lenovo ThinkPad, Dell, HP, Chromebook, and other notebooks. · Ergonomic Design: This LSX6N Laptop Stand could be adjustable in height and angle of your laptop for your better ergonomics to minimize neck fatigue, say goodbye to neck pains. · Stable And Protective: This adjustable laptop stand is made of premium Aluminum alloy, it is sturdy, support up to 8.8 lbs, no worry any wobble at all; the rubber on the holder hands sticks tightly, ensure your laptop stable on the stand and prevent any scratches. · Keep Laptop Cool: the open aluminum design provides good ventilation and airflow to prevent your laptop from overheating. Thanks to the open design, you could also keep your laptop peripherals under the stand, such as keyboard, mouse and other office items. · Height Adjustment 5.6’’-8.6’’(143-220mm): the laptop stand is made of sturdy aluminum, you could adjust the height with included manual screwn based on your request.
Related products
GTReviewed in the United States on May 13, 2025
I'm tall and it comes just to my eye level on the highest adjustment. It was easy to put together, but the screws are a bit weird when you put them in (they stop at different heights). No problem though, it's a sturdy stand. I don't believe it's foldable so it's more of a permanent solution, but that's just what I required since I work from home and game on a laptop as well. Laptop cooling has been fine, I haven't noticed any spikes or fan speed increase. I like that you can put your keyboard under it or behind it with no issues. Basically, it opens up desk space which is great on a small desk.
Paul C HuangReviewed in the United States on April 21, 2025
I bought the one on the left previously and these are supposed to be the same product. However, the design has changed. The new design provides better stability, as it is one single piece supporting the entire area, rather than an inverted-U-shaped platform. The bottom’s monocoque/capped (with edges folded 90° provides better stability) reduces flex. Overall, it’s a good progression, but I still like the old one’s look. However, as soon as you put the computer on the stand, how it looks does not matter anymore—how it works is what counts.
corsolReviewed in the United States on May 23, 2025
This is a great laptop stand elevating it for better viewing and virtual meetings. I liked it so much bought one for the office as well
Completely unsatisfiedReviewed in the United States on May 23, 2025
Bought as a gift, assembled quickly works perfect.
StevoTNRReviewed in the United States on March 20, 2025
I assembled two of these units this morning. The laptop stand arrives in three pieces - the base, the adjustable riser, and the top. A small packet of hex head screws and a matching hex wrench are also included. The screws that you install during assembly are ALL hex head screws. 1) The adjustable riser already has two very small screws at the top and two at the bottom that are there to align to the guide holes in the base and top components. DO NOT REMOVE those small screws. 2) Follow the simple assembly instructions but START the hex head screws with your fingers. The hex head screws have very small machine threads and they are easy to cross-thread. Once the screw is started, use the long portion of the L-shaped hex wrench to gently seat each screw, alternating from one screw to the next and back until it is gently seated. If you feel resistance before the screw is most of the way in, remove the screw and restart - it may be cross-threaded. 3) Once you have the screws gently seated, switch to the short end of the L-shaped hex wrench and tighten each screw, again alternating from one screw to the other and back (I went back and four about four times). The top component will feel loose until you have completed tightening the screws as I have described - trust the process and continue alternating between the two screws. DO NOT over-tighten or you will strip the hex head on the screw. Once the screws are properly seated, the top WILL NOT feel loose. 4) When adjusting the height of the adjustable riser, DO NOT over-tighten the thumbscrew. Only tighten it enough to prevent your laptop from sliding down. Once fully assembled, the stand is sturdy and does the job for which it is intended. It does partially cover about one-third of the vent holes on the bottom left of my Dell Latitude 5540 15.6” laptop. It seems to be OK thus far, but the product does specifically mention compatibility with Dell in the description. I recommend that you check the location of the vent holes on your laptop. Deducted one-half star for assembly and one-half for covering vent holes.
William MontañaReviewed in the United States on May 23, 2025
Awesome, very strong and resistant materials.
Michael SivertReviewed in the United States on May 17, 2025
Easy to assemble - sturdy and very supportive.
JosefekReviewed in the United States on May 14, 2025
Using this as a stand for a Spark 2 guitar amplifier. Works perfectly!
CharlieReviewed in Australia on May 15, 2025
This was a perfect cheaper alternative than buying a whole new standing desk. Wish I bought this sooner as it's saving my back! The quality is great and it's super sturdy. The grips are really helpful as the stand and laptop doesn't slip around and the silver colour matching my macbook.
psalmdrummerReviewed in Germany on February 19, 2025
Diesen Laptopständer nutze ich gerne, da er sehr stabil ist und sich von der Position her leicht anpassen lässt. Auch bei Stehschreibtischen ist er sehr gut einsetzbar. Ein Pluspunkt ist, dass man ihn ausreichend hoch genug stellen kann. Dies ist hilfreich, um am Laptop mit einer passenden Höhe zu arbeiten und dabei Nackenschmerzen zu vermeiden.
Rita KarkourReviewed in the United Arab Emirates on February 22, 2025
So good. Raised my laptop.
M.MReviewed in Saudi Arabia on March 26, 2025
serves its purpose
Isadora PaulinoReviewed in Spain on May 14, 2025
Adorei o suporte! Bom material e de fácil montagem.