product image
product image preview
product image preview

Fender American Standard Strat Tremelo Arm, Guitar Accessories, Metallic (Pack of 2)

19.98

Save $8.00

Other platform prices

Fender American Standard Strat Tremelo Arm, Guitar Accessories, Metallic (Pack of 2)

4.6

Highest ranking 101

13 comments

$19.98

Save $8.00

Other platform prices

· The information below is per-pack only · Genuine Fender Part 099-2054-000 · Fits most USA made Fender Stratocasters requiring a threaded arm · Color: Chrome · Threaded; White Tip

Related products

Reviews From
avatar

JedReviewed in the United States on February 13, 2025

Fits my strat as it should. I rarely use a tremelo arm, but now I have it if I need it.

avatar

Robert LucasReviewed in the United States on December 12, 2018

First of all, like all Fender genuine products I've purchased, this is top quality. Now, many people have given this bad reviews claiming that this is unusable. The claim is that, when the arm is screwed in all the way it is so low to the guitar body it is incredibly difficult to use. This is actually true...though not the whole story. You see, Fender screw-in tremolo arms are supposed to be used with a small spring inside the trem arm mount hole. This isn't made obvious and many people probably lost the spring (or didn't get one on a used guitar) so would never even know it needs to be in there. Fortunately I knew about this, and ordered a pack of Fender tremolo mount springs (from here on Amazon). Bottom line: With the proper tiny little spring in place, this tremolo arm screws in just the right amount, has perfect height, adjustment and feel, and works perfectly. Yes it's not the same as the ones that come with american Fenders but that's not what it's advertised as. For the price, it's an amazing product. If used correctly. I hope this review can help others make this work the way they would like. I love mine!

avatar

Mack & MelindaReviewed in the United States on August 27, 2024

Threads fit fine on a MIM Fender Strat 2002 Tried the spring and ball bearing setup ( Look it up ) . ( Actually used a BB ) worked well after trimming 1mm off the spring. ~ All good

avatar

Michael LongReviewed in the United States on May 18, 2025

PERFECT fit to my Mede in Mexico Strat. Couldn't be happier.

avatar

Wm D. S.Reviewed in the United States on September 19, 2021

This is incredibly loose in my made in Mexico fender strat from the 1990's. Its loose enough that I'm sure it's the wrong size. It works, but it's loose as hell. I'm keeping it and using it. I like the angle it has and the length seems right as well.

avatar

BillkwandoReviewed in the United States on March 1, 2017

I read all the conflicting reviews on whether or not this bar will fit in Asian/Japanese strats, and decided to take a chance. I'm glad I did! :) This bar is approx. 5mm in diameter, just FYI. Recently got a Ken (L'Arc~en~Ciel) signature model Fernandes Love Driver LD-95KK (the orange sparkly one with the gold aluminum pickguard and iron trem block), and inexplicably, it came with a left-handed whammy bar. From Japan.....let that sink in. The whammy bar actually fit, except for being backwards (Pro tip: If you've never owned a strat before, the threaded hole for the bar is actually at a DIAGONAL angle inside the block, so don't freak out, like me, thinking your trem bar hole is crooked). I basically held the bar up to my screen and compared the threads, and went, "Yup, it looks like that will fit!"....and it actually did. I'm assuming that if it fits the LD-95KK, it will probably fit any Love Driver, and likely any Fernandes strat. I just wanted to post this helpful bit of info. Protip #2, if you're ordering the arm, go ahead and order some Fender arm tension springs too. I recently learned about them after discovering that the only way the arm is fully firm is if it's screwed in all the way, which makes it parallel to the string, with no downward movement. No bueno! Drop in a tension spring and screw down the bar, and then you can leave it in any position and it should stay. OH! I wanted to mention as well that, also contrary to some of these reviews, my bar was a genuine Fender in the packaging, and the end cap needed to be pressed down over the bar. There's a small double-sided flange on the bar that helps hold the plastic cap on, so if you're hoping for a smooth Floyd Rose style bar for use without the cap, then this is not the bar for you.

avatar

WilmarReviewed in the United States on August 23, 2024

Excelente producto

avatar

MatitoReviewed in the United States on March 1, 2017

I bought this for a 2003 Fender Stratocaster, to replace the plastic arm tip which my French Bulldog decided would be a delicious toy to chew on while my guitar was in a fret-rest in my studio... An original Fender part was shipped to me, which was reassuring at first. The thread size was correct for my guitar, which was fantastic until I proceeded to screw the arm into the tremolo bridge: that is when the problems started. When the tremolo bar is screwed in to the bridge properly, it hits the volume and tone knobs and will not even go past them or the pickup switch, rendering the tremolo bar useless. BIG problem. The new purchased arm is precisely one inch shorter than the original Fender tremolo bar, which I actually prefer. Instead of sending the tremolo bar back to Amazon, I carefully wrapped/covered the tremolo arm and slightly bent it with vise-grips so that the bar would clear the volume/tone knobs and pickup switch. 3-stars because I like the shorter bar and didn't mind bending some steel.

avatar

Michelangelo MacalusoReviewed in Italy on January 22, 2024

Ho voluto rischiare avendo letto adatto alle standard messicane e mi è andata bene 😊 monta tranquillamente sul ponte a due pivot della player (anno 2021 ma penso siano tutti uguali)

avatar

Mスポーツ気功院Reviewed in Japan on May 10, 2025

しっかりと、ギターに馴染んでいます。

avatar

RomanReviewed in Germany on May 15, 2021

Super fit for US or MIM Stratocaster!

avatar

My 2 CentsReviewed in the United Kingdom on November 23, 2024

Fits my 2023 Mexican Player 2 Point Trem

avatar

Collin StantonReviewed in Canada on February 14, 2021

Perfect fit for a MIM Stratocaster.