product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

NC Projector Wall Mount with Universal LCD/DLP mounting ,Telescopic Bracket Hanger,22lbs Load Capacity,High-Precision Adjustable:(19.49"-49.21")

109.99

NC Projector Wall Mount with Universal LCD/DLP mounting ,Telescopic Bracket Hanger,22lbs Load Capacity,High-Precision Adjustable:(19.49"-49.21")

4.6

Highest ranking 101

6 comments

$109.99

· ultra Short Throw Projection,Most sturdy of all, great fine tune knobs, best manual (very very detailed),It has the advantages of heavy load, over four times machine, high negative precision, small shaking, fast adjustment, quick positioning, small package, light and portable · The extension range of the projector on the wall: the shortest is 19.49inch and the longest is 49.21 inch . · The mounting plate of the projector bracket has four adjustable and freely retractable horizontal axis mounting arms, which is a universal mounting bracket for ultra short distance projectors. The maximum distance between mounting holes on the back of the projector must be less than 12.5 inches. · Adjustable in three directions: vertical up ± 5, horizontal left and right ± 5, left and right floating up and down ± 5 degrees, fast positioning of high-definition images · With accurate arm spread scale, it can reach the military level, and is convenient for accurate positioning in the adjustment process · Compatible phone models: HTC One

Related products

Reviews From
avatar

Stephen AtnipReviewed in the United States on July 3, 2023

I bought two of these to support a pair of Eiki Ek-501WL projectors, which are pretty weighty projectors at 21.3 lbs (9.7kg). These wall-mounted projector arms are excellent quality and I cannot recommend them highly enough. The base mounting plate is very sturdy and has many different mounting holes allowing for several lag bolt position mounting options. The telescoping arm is highly adjustable and is also very sturdy and solid construction. The mounting plate that attaches to the projector is also extremely configurable. There are 4 mounting arms that can be disconnected and reconnected into the different slots to accommodate almost any projector hole mounting pattern. For the projectors I installed, the farthest spaces holes are 15 inches (38.1 cm) apart and it was able to accommodate this with some adjusting. As a side note, this mounting plate that attaches to the projector and its configurability is very critical to altering the angle of projection, if the projector screen is not perpendicular to the wall. Natively, it's designed to aim at a perpendicular wall and the arm itself has very little rotational range of adjustment, so this must be compensated for using reconfiguration of the arms on the projector mounting plate. Fortunately, this is not difficult to do, but may take some trial and error to get the plate angle right. My only criticism would be the instruction manual, which is not well-written, and it can make identifying the correct bolts/screws a bit of a challenge. This is made more of a challenge because the hardware pieces included provide many options. Overall, I would definitely buy these again and recommend them!

avatar

Kristopher M.Reviewed in the United States on September 13, 2021

This thing is pretty cool, they really thought of everything when it comes to this mount. I wanted to get a horizontal mount because the room housing my projector couldn't have something sticking up into the ceiling; most other horizontal mounts aren't long enough for what I needed, too expensive, or have a giant sliding rail (which is unsightly if you don't have your projector situated at the very end.) If you look at the pictures on this listing you'll find part of the manual. If you notice the knobs used for adjustment, this is probably the best part of this mount. Those knobs are smooth and they'll adjust pretty far in whichever adjustment, no jaggyness, and your projector will sit stable at any setting (that I tried at least.) The mount itself is solid, no wiggles, shakes or sways. The cable channel within the telescoping arm is a nice touch. The panels that cover the bracket are pretty standard. Do note, however, that this thing is a beast. I forget exactly, but I think I weighed the telescoping arm to be either 11 or 13 lbs by itself; its heavy. Be absolutely sure that your wall can support it because all that leverage is going directly into that bracket. I have metal studs in my apartment so I had to use some toggle bolts that were rated something crazy like 100+lbs each. Also, not sure why the company nor the actual mount model isn't directly listed on amazon. At least for me, that's a major annoyance when I can't find the company directly responsible. According to the manual, its manufactured by Viri Smart Media Solutions. Website: vricn.com Model: PWM30C-F

avatar

Xavier SerranoReviewed in the United States on March 15, 2024

Click to play video Follow the instructions to the T If you are putting it on a drywall type of wall make sure that your studs are at the right length and sizes. It must 100% be installed on the studs otherwise it will start to fall specially if you extend it. Other than that it is great material and great value it doesn’t look bad on the wall. The covers have this areas where you can choose to cut through if you need to feed cables through.

avatar

Jeff R.Reviewed in the United States on March 18, 2022

Great mount. My walls were too far apart to have the screen project just right, so I needed a mount with at least 36 inches of travel that would still hold up. This was a great option... in fact, this was the best mount I could find. It came well packaged, on time, and is a solid mount. I did not run my cables through the wall, but it is build to do it very easily. That will be my next project, but for now I'm extremely happy.

avatar

Jared AReviewed in the United States on December 10, 2023

Love it

avatar

jorlandReviewed in the United States on January 3, 2023

I bought this for an Optima projector. It did take a few hours to set up. Most of that time was spent installing 12-foot wires into the walls. I installed in a mobile home with thin walls. I was able to attach to two studs and it is quite sturdy. The instructions were not that clear. I have a lot of small screws left over and after some problems, I realized I did not need to use the extending arms. It is very adjustable and stable.