Great for home and small offices. The base and two satellites ensures good coverage of my whole house with one satellite downstairs and one upstairs. The setup was remarkably easy and straight forward. I was up and running in a few minutes. Once setup, the performance has been great. The wireless router supplied by my ISP had terrible latency (~100ms) but the Orbi has been fantastic (~10ms). The Orbi also performs well with all of my IoT devices with a stable connection since I set it up. The Orbi is a great balance between user-friendly and high-end performance. It’s a fantastic solution for anyone looking for hassle-free installation and robust whole-home Wi-Fi coverage

Great product. The app works great and makes setup very easy, especially if you are upgrading an existing network. My network has over 20 devices connected to it and having to go to each one to connect them is a time consuming pain, but I didn't have to with this product. It located my devices and connected them for me. The signals are strong throughout the house with no drops. This is in contrast to the terrible ASUS ZenWiFi BT6 it replaced. That product's app is terrible, the setup is a reinstall of everything and the router itself randomly drops connections.

Outstanding GUI, Firewall, and Wireguard VPN support - Product - NOT so much! I replaced a Linksys Mesh Wifi 6 Router & Linksys Velop Pro 6E WiFi Mesh Nodes. Why, Linksys tech support absolutely bricked my Linksys Mesh Wifi 6 Router, locked it up so it would not even allow a logon directly connected to a computer. I have used Linksys since 2014 with some, but not many issues so I thought it would be just as good, was I ever wrong! First tech support is NOT useful. Second, product is NOT reliable. Compare that to the ASUS ROG Rapture GT-AXE11000 & ASUS ROG Rapture GT6 AX10000, Night vs Day, period. The tech support for Asus is FAR superior to Linksys, far, far, far superior. I programed the router, added and moved the nodes to their respective locations and enabled my Proton VPN on the router and programed the firewall. I set up the static IPs for my Security cams, my Synology Drive and other equipment I wanted the IP address fixed. To say this process was simple is an understatement. The GUI interface is exceedingly helpful and informative. ASUS was build and programmed with the end user in mind. What I liked, The GUI, Firewall, and Wireguard VPN support. What I do not like, the consistent drops of the ROG Rapture GT6 Nodes. It IS horrible, at a distance of 30 feet or so it drops over and over. This requires the user to reset the node and add it back in continually. To top that off the router acted up and started power cycling on and off without connecting. To address that I had to reset the router and repeat every step I made to the firewall and VPN programming. Tech support WILL help you with this process however, if you must add the nodes and correct issues with the router over and over, the product is useless. Toggling from Airmesh on the Dashboard to the Network map in the Advanced Settings section my connected node showed GREAT connection, and my Network map showed 3, then 4 bars all the while connecting, disconnecting, then reconnecting. I actually watched this take place and do it do it over and over. Keep in mind this node is less than thirty feet away! The other node set at ~30’ dropped after 4 hours of being connected and had to be factory reset once again to add it back. Note; at 40 feet the one node will not connect, move to 30 and it did but drops. Any closer than 30 - what use is a node? I also had the internet service provide come out and test the lines. We did improve the throughput to the house, marginally but increased the signal quality some. Afre that, the Node crashed. I reset the entire system and the on again off again node issue resurfaced confirming an issue with the router not the ISP. Checking the ASUS blogs identifies this as a documented issue with the system with bloggers really upset, rightfully so. This known issue has been left unaddressed, seemingly ignored by Asus. Asus you have a great GUI, GREAT product support, and a terribly dysfunctional product, a product prone to crashes and drops. That IS the bottom line. I intended on moving on to TP-Link Tri-Band WiFi 7 BE22000 or NETGEAR Orbi. I imaged reviewing/testing products whether I wish or not simply as a customer needing one; preferably one that actually delivered on its promises. I was leaning towards NETGEAR as it is a US Based company and the warnings that TP Link sales may be banned in the future as a Chinese based corporation. Reason: Chinese law mandates that any security flaws identified in its products must first be reported to the Chinese Ministry of Industry and Information Technology (MIIT) a agency of the CCP. I ultimately choose Netgear. The very next day after placing the order I read a Christian Guyton article “I just learned something awful about my home Wi-Fi setup thanks to iFixit’s ‘worst of CES 2025’ awards” confirming my fears. I look for TP Link to soon go down the same path as Tik Toc.After writing extensively on Linksys and Asus utter complete failure to deliver on a true network coverage and hardware capabilities I did purchase Netgears Orbi 770 Series Tri-Band WiFi 7 Mesh Network System (RBE773) - Router + 2 Satellite Extenders. I am very pleased to report that setup was easily accomplished with the ORBI android app. You can also do so with the web interface, I would based on my observations say that the app provides easy setup, use the Gui to fine tune your security settings not the app. Some settings are NOT available on the app, just the web based Gui. The Gui is NOT as flashy or fun as the ASUS Gui, but neither are the system failures. That was made clearly evident in the fact I did NOT have to contact product support one time, not once! That’s has always been my experience with Netgear products, I own plenty, they charge a premium and I am convinced they are worth it. Will I feel this way in a year who knows. I am just happy I found a secure and reliable product for my home network with firewall and VPN capability as well as being able to assign static Ips for several important piece of equipment to include a Synology NAS, all IP Cameras, doorbell and garage door cams, etc. Netgear’s Orbi 770 Series Tri-Band Wi-Fi 7 Mesh Network System (RBE773) - Router + 2 Satellite Extenders work, they just work. That is the bottom line. Save yourself time and headaches and just buy it. I do not think you will be sorry. My ONLY regret, I did buy it first. 2 week update: My Orbi system has held all its settings and I have been able to not monitor it as its throughput is working just as advertised. Our living room node is connected to my Samsung TV via Ethernet, and we have had ZERO drops or issues with buffering. That accomplishment is something neither Linksys or ASUS could deliver. The ONLY issue I have is it does NOT support Wireguard VPN capabilities just Openvpn. Wireguard is much more secure. Netgear are you listening?? It does however have firewall and openvpn , allows fixed IP addresses so Orbi hands-down a winner!

Purchased in Feb-2022 and it worked well for three years, as an additional satellite to our RBR750 router and original two RBS750 satellites purchased in 2019. When I checked for firmware updates, the software said none found. While implausible, I foolishly believed it. Oh well, it synched up nicely and did exactly what it was supposed to do, extending WiFi throughout the basement, main and second floors of a large house. Fast forward to 2025 - I upgraded and built some new PCs and I thought it would be a good idea to check on the Orbi situation. Still no firmware update available according to the orbilogin page (which is a local page at 192.168.1.1/start.htm). That seemed completely implausible, so I searched the NetGear website manually and found a far more recent set of drivers for the router and satellites. Conclusion #1 - Screw the auto updates feature - it doesn't keep your stuff up to date and when you press the issue, it lies to you. The only way to go is via manual updates despite the shrill and dire warnings. I very carefully followed directions for manual updates by doing the satellites first, and then the router. My original two satellites took the update and synched up immediately. This additional satellite purchased in 2022 did not. I tried everything - resets, power cycles, cache, hard wired, fiddling with firewalls and more. It shows a strong connection but goes from blinking white to solid blue without a pause at solid white, which is the synch state. The router was offering modern features that I wanted. But no joy with the third satellite, which was showing as having the correct firmware. So I figured it was a bad firmware update. I reversed the update to the router, and bingo...this 3rd satellite synched up pretty as you please. All while confirming that it was running the new firmware. Every attempt to run a fresh firmware update or a reverse to the original was rebuffed - the device would not allow a connection. When I updated the router back to the new version, the satellite again refused to connect. There is something defective in this satellite that has only become known three years after purchase. I am *not* happy. Over several decades, I have owned and recommended NetGear modems, cable modems and routers - some have died, but most have outlived their specs and have been given away. But the Orbi system is extremely expensive and I expect outstanding and flawless performance. WiFi 7 and DOCSIS 4 are still being rolled out. I am not willing to bin this system and shell out thousands for a new one. I refuse to pay them $99 for an extended support plan to look at this - I know what I'm doing here, and I've followed all steps properly and this device is malfunctioning. So buyer beware - NetGear's software interface is flakey and lies to you. Things pop up down the road even when you do things properly, and they are now tied to a subscription support model which a money spinner for them and which you should refuse to participate in. They should support their hardware, full stop.

In a nutshell, the Netgear Orbi 770 is a fantastic product that provides impressive coverage and speed. I highly recommend it to anyone looking to upgrade their home Wi-Fi setup, but be prepared to pay a premium for the performance.

Funcionan de maravilla en el interior manteniendo las altas velocidades de internet 5G que tienes contratadas, antes me alejaba 3 mts del modem y perdía el 40% de velocidad y en la mayor parte de la casa no llegaba el 5G solo el 2.4 y con un 10% de la velocidad contratada y en muchas áreas no había señal en lo absoluto, ahora conservo más del 95% de velocidad 5G en cualquier parte de la casa incluso en las áreas que antes no tenia internet, lo recomiendo al 100%, lo único que no me gusto fue el precio

Mi casa es de tres niveles y con el sistema se nos acabo el problema de no tener señal. Toda la casa queda cubierta, se mantiene una velocidad estable y buena y acepta varios dispositivos conectados.

The product page says that it’s a router plus a satellite when you order and that it’s new. However, I got only the router and there are marks and dents everywhere on this thing. Avoid at all costs.

Can not syn my new satellite for 2 hours, After review and tried C&J review, my system work great now, thank you for the help, i repost his post. credit to him. anyone having this problem, follow the step and give this a shot, thank you. 5.0 out of 5 stars Advanced setup may be required. Reviewed in the United States on October 21, 2023 Verified Purchase I've had good luck with my Orbi 750 system but wanted to expand the coverage with this satellite. I spent over 2 hours trying to get this to sync with my system with no luck. This is what I ended up having to do, and id assume this will work for whomever runs into this issue. Start by plugging the new satellite into the Orbi router with an Ethernet cable. Plug the new satellite into power and wait for it to boot up (usually 2 minutes). Wait for the light on the satellite to turn blue and then turn off. At this point open a web browser and log into the Orbis interface (192.168.1.1) enter your username and password when prompted, then select attached devices and find the IP address of the new satellite. Once you've located the new satellites IP address open a new tab and enter the new satellites IP address into the address bar and login (Username:admin/password:password). Once you've logged into the new satellites web interface look for the firmware version and compare it to your existing Orbi firmware. If it doesn't match you need to manually update the new satellite firmware. Open a new tab and search RBS750 firmware. Find the firmware version that matches your current system from the Netgear support site only (not 3rd party). Once you've located the correct firmware download it to your desktop. When it's finished downloading extract the zip file to your desktop. The firmware file will end with .chk . Now go back to the browser tab for the new satellite and select firmware/update Firmware then select browse and navigate to the unzipped folder you downloaded and select the file ending .chk and update. This process can take up to 19 minutes. Once the satellite is finished and there is no light coming from the new satellite unplug it from your router and place where you want it and plug it back into power. After the light on the new satellite finishes blinking it should go blue for a moment then off. If the placement is poor you may get an amber light instead of blue and magenta if it's too far from the Orbi router. This is how I got mine to work, I hope this helps someone in the same situation. After all this it works great for me.

The description says this is 100-240V, but the unit I got is only 110V. If you live in a place with only 220V, then this unit is NOT usable. I had to request a return, which is not a fun process. It is been three weeks now and the request is still pending...