product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

Official Creality PETG 3D Printer Filament 1.75mm 1KG (2.2lbs), High Precision, Strong Toughness, Odorless, Better Flow, Moistureproof 3D Printing CR PETG Filament, Black

11.69

Save 27%

Other platform prices

Official Creality PETG 3D Printer Filament 1.75mm 1KG (2.2lbs), High Precision, Strong Toughness, Odorless, Better Flow, Moistureproof 3D Printing CR PETG Filament, Black

4.4

5K+ bought in past month

Highest ranking 68

13 comments

$11.69

Save 27%

Other platform prices

· 【Creality CR-PETG Filament】Creality CR-PETG combines the benefits of PLA and ABS to reach Eco-friendly and odorless performance. This PETG Filament is feature in good toughness to avoid cracking and warping, enbale excellent 3D printing. · 【Toughness-enhanced PETG】 Creality PETG choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish. It is recommended to use a printing temperature of 220-250°C and a base plate temperature of 70-80°C for better printing results. · 【Tangle-Free & Neatly Wound】We ensure that every PETG filament is tightly and neatly wrapped by utilizing full mechanical winding, which effectively minimizes tangles, filament snapping, and line breakage. · 【No Clogging & No Bubbles】Our filaments are thoroughly dried and carefully vacuum sealed to protect them from moisture and dust, which ensures that there will be no issues with clogging or bubbling during printing. Our PETG is designed to be perfectly compatible with the majority of 1.75mm FDM 3D printers, especially suitable for Creality 3D Printers! · 【High Precision & Consistent Performance】Our PETG filament boasts a diameter of 1.75mm, ensuring utmost accuracy with a tolerance of only +/- 0.03mm. With strict quality control and impeccable dimensional precision, Ender PETG filament guarantees a smooth and steady feeding during printing.

Price trending

Related products

Reviews From
avatar

B. BootheReviewed in the United States on May 3, 2025

I tried this new brand of filament mainly due to the price. I put it in a filament dryer for about an hour and a half beforehand. I had no issues with clogging or adhesion problems on my first print. I did have some warping on a second print of the same models, but that may have been due to the fact those parts were near the edge of the plate. I will say that this particular filament is extremely shiny, much more so than the other brand of black PETG I had used previously. And I mean SHINY... like Darth Vader helmet shiny.

avatar

Reader2010Reviewed in the United States on May 18, 2025

I used the whole role prior to writing this review so that I had a good understanding of how well or poorly it works. I'm happy to say I had no issues with the filament. I have found that "normal" (not high speed) filament works very well with high speed printers, this is custom made for high speed printing

avatar

LaceyReviewed in the United States on May 31, 2025

Love Creality’s color selection. Currently using the light blue PETG. Got about 1/3 of the roll left and so far it has printed perfect using the presets on my X1C.

avatar

foureight84Reviewed in the United States on April 28, 2025

I haven't seen PETG this cheap since before the pandemic. These are definitely quality filament. Accurate dimension. The vacuum bag could be better because mine wasn't really vacuum sealed. As soon as I pulled it out of the box the bag was loose. There was definitely a hole in the bag somewhere. Anyway, nothing a filament dryer can't fix. It prints very smoothly. No stringing, extremely smooth top surface (I don't iron my top layer), and nice glossy walls. Well worth every penny.

avatar

NoriReviewed in the United States on May 16, 2025

This is not tangle resistance, it tangle about 3 times when printing. Color is not as transparent and clear. The filament itself is a great quality ans there just maybe few adjustments needed to make but with the experience we had with this filament it could have some improvement.

avatar

LorelaiReviewed in the United States on February 23, 2025

So far so good with this filament. I'm new to 3D printing and own a Bambu P1S. This is my first attempt at printing PETG. I wanted to print a few items for outdoor use in the garden this spring and needed a filament that can better handle higher temperatures and UV exposure. For my first print, I ran a simple retraction test print having a base and two small upright cylinders and used the "Generic PETG" settings with no modifications. This print came out looking good with no blobs or stringing but, had very poor layer adhesion. It basically crumbled with a little bit of pressure. I increased the initial layer temperature from 250C to 265C and the other layers temperature from 250 to 255. I also slowed down the initial layer and infill speeds to 30mm/s. Bed temp was 70C. This produced a much better print that could be bent and twisted with no breakage. I did add a better nozzle cleaner and HEPA filter to my printer before attempting PETG printing since it can ooze a little more than PLA and gum up the nozzle.. These can be found on the Printables site as "BambuLab HEPA Filter" and "The Scrubbler". I've only run a few tests at this point but, from what I can see, I would definitely buy this filament again.

avatar

DIRTY DOVIReviewed in the United States on April 1, 2025

I just received a brand new Creality K2 Plus printer, so instead of using the tried and true PETG that I've been using Successfully for 2 years, I opted to order this 'Creality' brand PETG instead.. Same company, it should work.. Right?! Nope!! Not even close!! 1 black roll / 1 gray roll. Both placed in the new SUNLU quad roll dryer - Set for PEGT - Left to run until done drying.. Print 1: Fails miserably.. Not enough heat to liquify properly, delamination, skipping, etc.. *This is where I 'assumed' that it was 'User Error' on My part.. So I keep re-doing / re-setting, etc. Same Thing.. FAILURES TO PRINT.. I finally figure it out - IT'S THE FILAMENT'S FAULT! It wasn't 'wound' onto the spool . . . it looked more like 'BRADED'! The line twisted onder and over line several rows over from it, knotting up, binding, jamming the printer's extruder.. *This lead to a few nuclear melt downs, having to keep disassembling the extruder, clean out nuked tips, etc... Onto Roll Two: Gray roll, load, extru . . . extru . . . NOPE! NO EXTRUDE . . . The stuff wouldn't melt properly.. What?!?! Again . . . NEW PRINTER, so I assume this has to me Me or the Printer! NOPE! Laser-Thermometer readings don't lie. Everything on the machine end Was Correct And Hot.. I had to max out the tip temp, get it to melt in manually, but then it Wouldn't Retract.. *This nonsense repeats on an endless loop before finally working . . well . . for 3/4 of a print . . Then FAILED.. Yet again, it stopped melting, jammed the tip, and splooged out all over the hex-section of the nozzle.. C'Mon!! So at this point, I go to cut the line at the spool, and Go Figure . . . the line is all knotted up in a bird-nest AGAIN. TWO ROLLS Back To Back - Different Colors, so, Different Batches.. Not Cool. [3 previously used brands work fine!!] *I initially intended on contacting the seller directly, but Amazon decided to make that harder to do/find, so, I guess we'll just rant about it here. HEADS UP!! [As Of Right Now] . . . ***AVOID!! -- NOT RECOMMENDED!!*** *I'll update IF/WHEN this issue is addressed/corrected

avatar

Hunter B.Reviewed in the United States on May 27, 2025

Great quality product that works great right out of the box.

avatar

Bluey05Reviewed in Belgium on May 10, 2025

Exactly the color needed for printing my lifesize Star Wars Battle Droid!! Quality of the filament is excellent would happily buy again if it becomes available again!

avatar

BetsyReviewed in Mexico on November 14, 2024

Aun no hemos realizado impresion con este material, más el empaque y sellos estan en orden

avatar

JLReviewed in France on April 7, 2025

RAS.

avatar

Fabíola M.Reviewed in Brazil on May 15, 2025

Filamento chegou " úmido", grudento. Não adere a bancada e se acumula no bico da impressora. Falha na embalagem de vácuo? Realizado várias tentativas de uso com diferentes parâmetros. Sem sucesso.

avatar

Rolando EzequielReviewed in Mexico on November 28, 2023

es de buena calidad, se imprime super bien, solo un rollo estaba mal enrollado pero se soluciona antes de usarlo