I started installing screen protectors in 2006. I have done hundreds of them for myself and friends. I've seen a lot of them. This is my favorite brand. They include everything you need and charge a fair price. They hold up well. You get 3 in this pack. Very handy. Keep the other 2 safe in the box and replace them about every 6 months when they get dirty if you use your phone a lot like I do. They include alignment stickers which are very helpful your first few times you install one. I don't use them anymore. It's not necessary. Here is how I do it. Don't have your phone case on, that's just silly. It will be in the way. Ok here is how I do them: Go out to hard surface counter in your kitchen. Kick everyone else out of the room. Stops the dust from flying. Wait one min. Power the phone off. Lay phone on the counter horizontal ( see my picture) and take the new screen protector with the backing tape still on it and lay it on your screen( it won't stick until you peel the film off). I always lay the phone down horizontal, way easier to center. Set it down and see where it needs to go. You will have a camera hole to align the whole proctector with, or a notch on older phones, center the hole in the protector around the camera hole in the screen. Now set the protector aside for a second and wipe down the phone screen with the included alcohol pad. Next use the included soft gray cloth to dry it. Peel the film off the back of the proctector and hold it with both hands, now set the protector down on the camera hole side only- make sure it's centered with the hole and squared up with the screen. It's not too late to pick up the one end of the protector touching the phone screen and just reapply it. Once you have it where you want it just slowly let the other side down( non camera hole side) let the screen protector be sucked onto the phone screen by slowly letting go of the protector. It will go down by itself and remove all the air. Take the gray cloth and make sure to wipe the screen protector all down so it's securely attached to the screen. Power the phone back on with your case still off. Get the screen warm and let it dry for a few mins. I usually don't put my case back on until the next morning. Your done. This takes about 3 mins to install once you do a few. I suggest not trying to be perfect. Follow the steps and if it goes bad. Try another protector. These things are cheap. Cost of learning is low. It's a great protection for your phone. Mine is in my pocket all the time and that puts tiny scratches in your screen over time. Makes the screen feel rough or dirty after a year. Using these protectors stops the screen from getting worn out, you can just keep replacing the protector to make it like new. Way easier to keep clean than a worn out screen. Looks better also. Pixel fingerprint sensors are on the screen. I hate that, they work but not well. This protector did not change that. It's the same. Works but not perfect. That's on Google not his protector. I recommend this product.

I ordered this for my Pixel 9 Pro XL. Be aware this is ONLY for the front screen and does not come with camera bar protectors. The 3 screen protectors come in a nice solid plastic case that can easily be put on the side and hold the extra screen protectors for later use. The screen protectors themselves are also in foam sleeves while in the container. The kit comes with enough installation materials to complete 3 installs. 3 alcohol preps, 3 sets of dust removing stickers, 3 sets of alignment stickers and 3 small microfiber clothes. Installation is easy using the sticker hinge method, there is a QR code to watch an installation video. Once installed I tested my fingerprint reader and it so far works perfectly after a few weeks of use, the same as without a screen protector.

This screen protector is the easily one I've ever had to install. It comes with a screen wipe, some alcohol wipes and more accessories for easy installation although I found that since it was so easily I didn't need any of them except the smoothing out tool. All of the parts come in a plastic case so you don't have to worry about the screen protectors breaking in transit. I like that it comes with 3 screen protectors in case you need a replacement. The glass isn't too thick or thin. I haven't dropped my phone... (yet) so I can't speak for the durability of it but so far it has no scratches or nicks. There is a small hole for the front facing camera. The only downside is that the protector doesn't extend all the way to the sides of the screen, so if you use the swipe motions of the phone (I prefer to use the 3 icons on the bottom) it might be bothersome because I did find that the swiping motion wasn't as fluid. Overall I've noticed a very small difference vs not having a screen protector but it's not cumbersome enough for me to look for a different screen protector.

I've used used these for several years now on multiple phone models and they work great! The install is simple, the fit is just right, and they have protected my screens on multiple occasions. Why would I use anything else?

The product is nice. My only issue is that my new phone seems to have a harder time seeing my thumb print. I think that's more the phone than the product. It feels nice and the instructions were easy to follow. Adhesion is nice since I would put it on make sure it was centered and pull it off to readjust it a few times and it keeps sticking. Size looks perfect for the screen.

Super clear, but doesn't interfere with the touch function. I have used this brand on 5 phones now and never disappointed. I highly recommend this product. It ships as a 3 pack as the protector will crack if you drop or hit your phone on something, but your phone's screen will be fine. This is the only screen protector I will purchase.

Looks like a promising protector. I searched specifically for Pixel 7 pro and this protector came up in the results. I didn't notice it was for the base pixel 7 until I went to put it on.

Excelente

Really good product. Good value. You get 3 screen protector which you could change every 6 months or something. Instructions easy to understand. You must read the instructions before you install the glass !

This is one of the best screen protector brand I have come across. Not even a single bubble, installation was really easy on Pixel 7 phone. I would highly recommend it.

Très bien

If you start with a perfectly clean screen, and keep it dust free before application... If you hold the protector right above the screen and aim to keep both index fingers and thumbs holding corners of the protector so that you can aim directly for the center... If you gently let it settle, centered, on the screen and let it start to adhere on its own and give it time to finish... If you then coax out any and all bubbles and see if it has actually adhered evenly from the edges on all sides... And if you then give it a few hours to one day to let all parts of it adhered to your phone... You WILL be able to put this protector on far more successfully than with others. Very few others are actually cut correctly. These are worth a shot. But you have to be careful and patient.