product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethernet Splitter, Plug & Play, Fanless Metal Design, Shielded Ports, Traffic Optimization,Navy Blue

13.95

Save 30%

Other platform prices

TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethernet Splitter, Plug & Play, Fanless Metal Design, Shielded Ports, Traffic Optimization,Navy Blue

4.7

10K+ bought in past month

Highest ranking 101

10 comments

$13.95

Save 30%

Other platform prices

ยท ๐—ข๐—ป๐—ฒ ๐—ฆ๐˜„๐—ถ๐˜๐—ฐ๐—ต ๐— ๐—ฎ๐—ฑ๐—ฒ ๐˜๐—ผ ๐—˜๐˜…๐—ฝ๐—ฎ๐—ป๐—ฑ ๐—ก๐—ฒ๐˜๐˜„๐—ผ๐—ฟ๐—ธ: 5ร— 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX. ยท ๐—š๐—ถ๐—ด๐—ฎ๐—ฏ๐—ถ๐˜ ๐˜๐—ต๐—ฎ๐˜ ๐—ฆ๐—ฎ๐˜ƒ๐—ฒ๐˜€ ๐—˜๐—ป๐—ฒ๐—ฟ๐—ด๐˜†: Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money. ยท ๐—ฅ๐—ฒ๐—น๐—ถ๐—ฎ๐—ฏ๐—น๐—ฒ ๐—ฎ๐—ป๐—ฑ ๐—ค๐˜‚๐—ถ๐—ฒ๐˜: IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation. ยท ๐—ฃ๐—น๐˜‚๐—ด ๐—ฎ๐—ป๐—ฑ ๐—ฃ๐—น๐—ฎ๐˜†: Easy setup with no software installation or configuration needed. ยท ๐—”๐—ฑ๐˜ƒ๐—ฎ๐—ป๐—ฐ๐—ฒ๐—ฑ ๐—ฆ๐—ผ๐—ณ๐˜๐˜„๐—ฎ๐—ฟ๐—ฒ ๐—™๐—ฒ๐—ฎ๐˜๐˜‚๐—ฟ๐—ฒ๐˜€: Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping. ยท ๐—ฆ๐˜๐˜‚๐—ฑ๐˜† ๐— ๐—ฒ๐˜๐—ฎ๐—น ๐—–๐—ฎ๐˜€๐—ฒ: Durable metal casing and desktop/wall-mounting design are well-suited for different environments. ยท ๐Ÿฏ ๐—ฌ๐—ฒ๐—ฎ๐—ฟ๐˜€ ๐—ช๐—ฎ๐—ฟ๐—ฟ๐—ฎ๐—ป๐˜๐˜†: Backed by our industry-leading 3-year warranty and free technical support from 6am to 6pm PST Monday to Fridays, you can work with confidence.

Related products

Reviews From
avatar

Marc H.Reviewed in the United States on February 2, 2025

Works great! Getting advertised speeds. Kind of warm, but nothing to worry about. The size is perfect! Quality aluminum, very easy to use, great value for the cost! Edit: I do want to add that this switch DOES NOT support Link Aggregation (IEEE 802.3ad LACP). Bummer. This makes it go from a 9.5/10 to a 8/10. Other than that, it's an extremely fast switch. I can't test it to it's listed ability of 40Gbps, but I've been able to test 3 x 2.5gbps transfers and they were all transferring at 2 - 2.3gbps.

avatar

Keith D.Reviewed in the United States on October 19, 2022

Edit 11/15/2024: I periodically like to perform check-ins on my previous reviews. Over 2 years later I am happy to say this thing still works flawlessly. Haven't encountered a single hiccup. Very consumer friendly and is truly "set it and forget it". ----------------- First off I need to mention that Amazon asked me to rate 3 "features": 'WiFi signal', 'Tech Support', and the 'User Interface'. Let me be clear that this device does not use WiFi and it does not have it's own local IP address to let you log into a "User Interface". Just wanted to point this out in case you come across other reviews that have these two "features" rated that could be misleading you. I recently built a house and had it wired for Cat 6 Ethernet, with there being 1 wall port in each room. One room in particular I have a desktop PC and an Xbox that I wanted both to have a wired internet connection to which is what required the purchase of this device. It is extremely easy to set up, and with it being "unmanaged", there was no portal I needed to sign into that would require me to mess with settings. It's a very simple "plug-and-play" set up, you simply need to connect an incoming ethernet cable from your router/modem (in any port) and then you can now share that internet connection to 4 other wired devices - that's all there is to it. One important note is this: if you have a modem-only device (these devices usually only have a single ethernet port on the back) then you are probably needing a router - not a switch. A router is capable of assigning your devices their own internal IP addresses via DHCP - which is important if you don't know how to assign them yourself. It's also what manages your NAT for situations your devices may need to use the same internet port number. While you don't necessarily need to know what all of this means, you need to understand that a switch is not a replacement for a router. If you are a consumer (as opposed to a business) then you're likely considering this switch to extend/add more ports than what your router has (they usually have around 4 or 5). Even the devices that are connected directly to this switch will still be getting their local IP addresses assigned from your router. The benefit of this switch over a "hub" is that it knows how to route your internet traffic to your devices. So even though it's not responsible for assigning IP addresses to your devices, it knows how to route specific traffic to the devices that require it. It does so lightning-fast - I notice absolutely no additional latency (which is great for gaming) and no compromise in speed either. If you're on the market for a small unmanaged switch, then this is an affordable and excellent choice. As I've said above, this device does not contain WiFi. You cannot connect this wirelessly to any device. You would be able to purchase a separate device that would connect to this to transmit a wifi signal, but this will not do it on its own.

avatar

BushwackerReviewed in the United States on July 30, 2021

Its a switch! Does what it needs to do. Pros: * Runs cold to the touch even when under decent load with multiple devices so its probably very energy efficient. * Seems to be very high performance! No latency or bandwidth changes vs direct CAT6a connection on gigabit ethernet. Tested with up to 3 devices under load. Latency was statistically unchanged and bandwidth/QoS was what you'd expect on paper so overhead is super low and on board protocols are implemented extremely well! Grain of salt though... I haven't formally benchmarked or even really used SOHO switches since the 10/100 days. Maybe all makes/models are similar nowadays, but 20 years ago using switches was only a tad better than a hub in terms collision prevention and simple QoS. * Physical build quality is top notch, with one caveat (see Cons) Cons: * Design of metal casing is probably perfect for mounting on the side of standard 1U or 2U racks, warehouse racks, or anything else with standardized screw hole placement and (ideally) the ability to come in from behind or at least see what you're doing. I needed to mount this to a wall in my home office where I couldn't just screw into a rack with standard mounts and slide the switch in place 5 seconds later. There may be a much better way, but the only solution I could come up with (in order to use the rubber feet as standoffs to allow airflow) was to take the housing apart and unscrew/remove the PCB to see what the correct distance between screws needed to be. In theory this would be the last step but unfortunately problem #2 (really the only roadblock in retrospect) was that when wall mounting, the shape of the mounting cutouts are such that you (or at least me?)don't give you enough "turning radius" to get the switch mounted without the offset from the screw head and the wall surface being stupidly long. The only solution where the standoff distance was both far enough to get the screw heads in there while ALSO getting it to mount securely without flapping around loose was to clip the opening a bit with sheet metal snips. This was a tad challenging but doable, mostly because of the cramped areas for maneuver. My recommended wall mount steps (unless someone has a better way) are: 1. Insert the screws in the mounting holes, and position in the narrower "top" area where they loosely stay in place when held in by hand. This will be the distance when mounted. 2. Gently press the switch and screws into the wall just enough to create 2 small dents so you know where to drill. 3. Drill. I didn't need a drywall screw due to wood paneling, but use drywall screws if bare drywall. If you think you don't need to just do it anyway. Its cheap, easy, and a good best practice to prevent yanks from plugged in devices, etc. 4. Screw the screws in 95% of the way. You may be able to just mount the switch ok. If not, you may need to do step 5... 5. (Optional). If necessary AND you know what you're doing, AND you don't care about warranties, open up the mounting cavity with metal snips, but only after you have unscrewed the device housing and have carefully removed all the (guts). Put them aside in an anti static bag to keep them safe. Start by clipping tiny slivers from the two mounting cavities on the bottom device housing piece. Adjust the screw depth until you can easily mount the housing without it feeling loose. You may need to test/adjust a few times, since the screw head will be blocked by sheet metal. This is the core design flaw, otherwise you could just (at worst) unscrew the top housing cover, remove the "guts", and just screw it in by hand, with the final step being to put everything back together (annoying but simple if you own magnetic screwdrivers). Again, only do this if no viable alternatives exist for you, as I'm sure it voids the warranty. Conclusion? Buy this excellent product, just be prepared for a "project" if this is going on a wall in a SOHO setting.

avatar

AlmonimymoniReviewed in the United States on February 10, 2025

Easy to install, no mess no crazy wires. Good metal quality that works as a heat sync. Overall this is an awesome product. Speeds didnโ€™t drop and was constant.

avatar

Elias ManasrahReviewed in the United States on February 19, 2025

Affordable and works great, occasional cut offs but Iโ€™m sure thatโ€™s on my ISP side. Overall really easy to use.

avatar

Michael McCoolReviewed in Canada on March 16, 2025

Product itself is simple, sturdy, and does what it says. Unlike some other switches I have seen it has clear indicators (lights) showing link activity and all speeds. The case is sturdy and fanless; latter is unusual for a 10Gbps switch. BUT: no rubber feet (easy to fix, but odd for a โ€œdesktopโ€ switch); no grounding point.

avatar

Hany TayebReviewed in Saudi Arabia on August 24, 2024

ู…ู…ุชุงุฒ ูˆุฌูˆุฏุฉ ุนุงู„ูŠุฉ ูˆุชุตู…ูŠู… ุฌู…ูŠู„ ูˆุนู…ู„ูŠ ูˆุณู‡ุง ุฌุฏุง

avatar

EserReviewed in Turkey on March 3, 2025

Sorunsuz รผrรผn, zaten bilinen marka.

avatar

รงaฤŸan avcuReviewed in Turkey on January 29, 2025

fiyat / performans

avatar

londontownsterReviewed in the United Kingdom on March 12, 2017

Good quality switch, silent running.