product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser, 10-Pack 16x16MM Anodized Silver Track with Curved Milky Cover, Corner Connector and Mounting System

69.9

V Shape 6.6FT 200CM LED Strip Aluminum Channel Diffuser, 10-Pack 16x16MM Anodized Silver Track with Curved Milky Cover, Corner Connector and Mounting System

4.4

100+ bought in past month

Highest ranking 101

9 comments

$69.9

· Matte Cover: The matte cover snaps into the extruded rail to protect the exposed strip from dust and moisture while smoothing out harsh light. · Trimmable Channel: The aluminum channel can be easily trimmed to the required length using a hacksaw or grinder. · Compatible with 5050, 5630, and 2835 LED strips: The aluminum profile is designed to hold the strip less than 12.1mm wide, fitting most 5050, 5630, and 2835 steady color LED strips. · Stainless Steel Mounting: The stainless steel screws and mounting kit prevent rust in humid environments like kitchens and outdoor eaves. · Includes V Shape Channel, Milky PC Cover, Mounting Clips, Stainless Steel Screws, Carbon Steel Screws, End Caps, and 90 Degree Corner Connector

Related products

Reviews From
avatar

Amazon CustomerReviewed in the United States on February 13, 2025

As described, shipped fast, good price.

avatar

JSMcEwanReviewed in the United States on October 18, 2024

This kit has plenty of sticks to finish an entire 10x12 room. Including across the closet, even though I didn't. Make a mistake, no worries, there is plenty of parts to fall back on. The corner pieces are also forgiving. Allowing you not to need to cut to tightly to make the sticks fit. I would have liked maybe some double wide clips for connecting unions better. The clips provided still work, but its a snug fit. With the staggered lens, you can't tell where the breaks are. The track is wide enough to fit two rows of led if you wanted. If you used to strings of 60, and staggered them, you could get a really cool effect. I'm running 120 so I'm sticking to a single white only string. Its going to be for lighting the room, and not effects. If i needed to get into the strip for a repair, or and addition, the covers are easy to work with. Flexible and forgiving. Easy to cut also.

avatar

BLDReviewed in the United States on October 26, 2023

I have no complaints here. Product arrived as described. Easy to cut with a hacksaw or dremel. Just be sure to clean up edges with a file or sandpaper. I used the included corner pieces to avoid having to cut mitered corners. Everything fit well. I bought the angled version. Put the included clips every 18" and at the ends. Popped right in and held tight. Very easy to remove if needed. Diffuser was a little work, but once in place, held nicely. You get the hang of it after a bit about how to align, squeeze and pop in. Diffusion is good. Yes, you see the LED's, but that is what you get. The LED's I used were about 3" apart. I used 1/4" 3M VHB tape (not included) on the channel. The lights themselves were in a silicone sleeve that picked up every molecule of dust. While the tape stuck really well to the aluminum, not so the LED's. A quick wipe of the backside of the silicone sleeve with alcohol before applying took care of that. For really long runs, I cut a 2" piece of the diffuser to pop in to hold the LED's until I got the full strip in place. All in all, I am very pleased with this product. Oh and came with enough clips and screws and stuff that I did not run out. FYI, they included end caps for each piece which I did not use as the hole was too small for my 10mm LED tape.

avatar

nam nguyenReviewed in the United States on January 15, 2023

Click to play video Take A LOT of effort to install these onto wall. The provided screws are very small and keep falling off. But the result when using it with Cob light is amazing.

avatar

Ali YasaryReviewed in the United States on August 26, 2024

They are hard to install when it comes to snapping the frosted cover on. The cover anyway doesn’t defuse the light.

avatar

thomas a stoneReviewed in the United States on January 8, 2025

good experience

avatar

Brian K.Reviewed in the United States on January 8, 2025

Fit the bill

avatar

HardworkinfoolReviewed in the United States on January 2, 2023

Great value for the price. Lenses are frosted perfectly. The lenses are somewhat tricky to properly snap in but with some patience, a novice can easily catch on

avatar

Amazon依存症Reviewed in Japan on January 21, 2024

2m×10本を購入。 4本が曲がる・歪む等の破損があったものの9本は使えそうだった。 新築の残り少ない工期に間に合わせるべく取り付けるため使えるアングルのみで作業した。 気になる点はLEDテープの両端がアルミアングルに接触しそう(一部接触)なため短絡を防止する措置としてカプトンテープを貼り、その上にLEDテープを施工する手間が結構大変だった。 個人的には幅10〜15mmのカプトンテープと幅8mmのLEDテープを用いるのが正解かと思う。 また材料厚が0.6mmしかないので大変歪みやすいので取り扱いには注意しなければならないと思う。 使わなければ関係ないが、石膏ボード用のボードアンカーは硬すぎて使い物にならないので別途用意する必要があると思う。 それでもビスや固定金具等の付属品が豊富な点は好感が持てる。 どうせなら連結金具もつけてくれたら嬉しかった(笑)