Bought this cabinet to retire an old steel file cabinet that I've had for many years and no longer need. This one fits perfectly under my workstation desk. Assembly is quite involved but easy to do once you get everything laid out. Be prepared to spend at least an hour minimum (or two) putting this together. All the parts were there (none missing) and everything fit together well. The drawer bottoms were a bit tight, so don't tighten up the screws until you get it in the slot. The hardware looks very good and seems to be pretty decent quality. The only thing I would change is the locks...each one has a different key. It would better if all were keyed the same so you didn't have to have three sets of keys. Another plus is all four wheels have locks so it won't roll around. The wheel under the front of the bottom drawer was a neat addition...to help keep the drawer from being stressed with the weight of many files (no lock on it as it's not needed). Overall, I like it and can recommend it. It'd make a great printer stand too. Do keep in mind, you must have patience when putting these type things together. If you don't have any, get someone else to do it for you.

I'm very pleased with this purchase. It took me a little time to assemble (approx. 1.5 hrs. without a drill), but it was well worth the effort. The instructions are very clear and there were even a few extra parts they send. It's the perfect cabinet for under a desk and the extra wheel for the file drawer gives it added support so I don't have to worry that it will sag when it gets filled. I highly recommend this unit, and I believe it's well worth the price for the quality of the cabinet.

WARNING: STEP 1 IS ACTUALLY STEP 2 !!! The first step is labeled "G Hardware disassembly example". If you miss that step, then you will wind up having to unscrew several pieces to make a correction. Apparently this is exactly what happened to the person whose review is entitled "Flawed Assembly Setup". Sadly, based on what they wrote, it appears they never figured out what went wrong. I disagree with some of the reviews. You DON'T have to rework the holes. EVERYTHING IS IN THE RIGHT PLACE. If something is off, you have missed a step. And most likely it's that "G Hardware disassembly example", which should have been labeled "STEP 1". If you miss that step everything which follows will be askew. Before I ordered this, I read the reviews and decided I would not be in any hurry to assemble the cabinet. Sure enough, in the kit I was sent, Board #16 was missing a plastic piece that the Cam Bolt screws into. I contacted the seller and they responded the same day. However, the part shipped from China and took 8 days to arrive. IMPORTANT TIP: Avoid using a power tool to tighten the Cam Locks. TIGHTEN THEM BY HAND. They will break if you use a power tool. SECOND TIP: Study the rolling casters before assembling them. ONE OF THEM IS DIFFERENT. That's the one you need to attach to the separate piece. The directions are OK. But they're missing subtleties that could help prevent you from having to unscrew parts because something was overlooked. I wound up unscrewing, changing parts around and then re-screwing in parts at least twice. But as you can see from the pictures, it all came together in the end. Think of this as a kit. All of the parts are included. But one had the wrong number on it. I figured that out based on the pictures in the directions and kept going. They say you can build this in 2 hours but that's under highly idealized conditions. If you approach this as something you'll build over a couple of weeks then you'll have no problem if one of the parts is missing and you have to wait for it to arrive. The seller is helpful and will make sure you have what you need. I haven't actually used this file cabinet yet. But so far, I'm satisfied at the way the drawers extend easily and without some sort of hitch. I also enjoy the way it looks in my office. You can tell it's real wood and not a cheap faux wood façade. I'll update this review after I've used it for awhile. So far, so good !

This is a nice looking 2 drawer file cabinet with a balancing wheel on the bottom to prevent tipping over. I chose it to match the color of other grey wood furniture in my office space. Once put together it works well but pay attention when putting it together. Don't make the mistake of snugging the drawer rails too tightly to the inside of the cabinet. The bottom drawer is ever so slightly too narrow and kept popping out of cabinet rails. Loosening the screws for the cabinet rails a little bit allowed the drawer to stay fully seated and it hasn't popped out since I made this adjustment. Also the file cabinet features keyed locks, but the keys are different for each drawer and the metal collar that holds the lock in place does not sit flush to the drawer face without a lot of pounding using a hammer and screwdriver. It is a light duty file cabinet for A4 sized hanging files and meets my needs. It is adjustable to letter size for hanging files but good luck finding them in a store. All in all I'm satisfied now that it's all put together and working. Update February 2025: I received excellent service from Vingli when one of the casters broke off. The casters were in the locked position and I slid the cabinet across my carpet and one of the casters broke off. (Note to self: unlock THEN move.) I contacted Vingli support and they shipped an entire set of casters at no charge. They took about 15 days to arrive but I'm pretty sure that overseas shipping was involved. I was prepared to pay for replacement casters, but they shipped the new ones at no cost. Very nice company and I recommend this cabinet even more! (Attached picture to show how it good it still looks after 16 months).