Desktop looks and feels great. Main concern is packaging. The box was not taped very well. Need to use that filament tape to make sure it stays closed. Fortunately, there was no damage. Could also be attributed to our favorite brown-knickered delivery crew. I bought this for my office at work. Went with something less expensive than the standing Veridesk at home. Aside from the thickness of the top, I would say this is in the ballpark. There's some wobble with the desk as it goes up in height. This was mentioned by some other reviewers as well. However, I don't think that is a big deal at all. I would probably purchase this over the verdesk if I had known about this sooner because it is a fraction of the cost. Regarding the size, you definitely want to get the 30 in depth one. 24 is too small. I am also getting the monitor arms delivered today, so that should free up even more space. I also purchased casters to go with the desk, but I found that after installing them that the desk sat too high even at its lowest setting. This is was an issue, because it was very difficult to use the mouse and type. So now I just have the desk on it's regular feet.

Hi - I literally searched Amazon for months, read reviews and finally decided on something that wasn't going to take me hours to put together. This 60x30 Vivo desk was the one! I work full time remote, needed something to sit/stand due to serve back issues and got this one. Shipping - arrives in two boxes and they are pretty banged up by the time they arrive due to the weight of the desk Unpacking - even though the boxes were damaged the desk was not at all, even the tops were fine (I was skeptical) Assembly - mind you I've put together IKEA products before, this was very easy to assemble. I'm 5.4 female and the toughest part was flipping it over and then back over and moving it around on the carpet. Took me no more than 2hrs due to the weight of the desk, not the difficulty. Functionality - moves up and down extremely smooth, is very solid. Supports my 3 monitor arm holder and no issues at all with wiggling. Support is fantastic. In summary - if you are willing to pay a bit more, work less on assembly and want a very sturdy, good looking desk - this is the one!

*Husband review* Sent this to Seller on JAN-26-2024: "Sharp edges observed at leading edge of panel joining. Recommendations for safety & level: (1) Full-length joining channel at front & rear instead of four short channels. Middle panel least support - continuous passive/active downward load with resting hands on keyboard. (2) Thicker gauge screws for joining channels, need better grab per above. Otherwise.. very nice, very quiet desk, good price." Assembly was fairly easy. The only challenging aspect was setting the leg width AND drive rod simultaneously. Otherwise, you should have this together within 2 hours, max: 30-45 minutes for the frame, and the rest of the time putting the top together, placing it on the frame, and situating the desk. A cordless drill with a low speed/high torque and torque adjustment dial will make this even easier. You just need one #2 Phillips and one Allen wrench bits to get this done. No hammers or other tools needed. They made it very simple especially with having the motor already mounted. Great instructions, too. The height adjustment is surprisingly quiet and VERY smooth. You have four programmable pre-set buttons with a manual UP and DOWN button. The lowest possible setting with the provided casters is a typical sitting desk or dining table height. So, depending on how you prefer to elevate your hands/arms for typing and using your mouse, you might consider an undermount keyboard/mouse thingy. It feels like the desk can be manually increased/decreased by 1/8" increments -- you really should have no issue finding the right height for you. The frame has substantial enough weight to keep the top from feeling the slightest wobble. This was my biggest issue with my prior desk -- if I bumped it during a video call, it would wobble and look like I was having an earthquake. And the top is substantial enough to mount reasonably weighted items underneath. Not just baskets and tracks to hold cords and surge protectors, but PC mounts if, again, it's reasonable. Make sure your screw length won't penetrate the top surface. For what you set on top the desktop surface, follow the manufacturer's limits for combined weight. The frame box includes two of these cord holders. When mounted, they're out of sight - out of mind, so.. I don't have a use for them, yet! But I suppose they could hold headphones or a corded earbud/IEM. Maybe a few cords, dunno. I got the 32"Wx63"L unit. In hindsight, I might have gotten the longer desk (73" I think) because my old desk was sort of L-shaped, but I'm using less equipment now that I have a KVM switch for my 2-PC / 2-monitor set-up. So I should be good to go. UNRELATED TO THE DESK ITSELF BUT CRITICAL TO KEEP IN MIND.. Just be very clear AND CAREFUL when setting up your cable management, accessories, and living beings stored/visiting under ANY sit-stand desk: - My PC is on a standalone cart just inches from the floor, under my desk to mitigate sound/vibration issues. I had to ensure my HDMI, DisplayPort and USB-3.0 cables (A) were long enough at the DESK'S MAX HEIGHT position AND MONITOR PLACEMENT and (B) didn't cause a trip hazard since there's a walking path along the backside of my desk. Be mindful of the absolute max-height needed where all your connections occur. The last thing you want is to proudly sit at your new desk, press the button for max height, hark! the herald desk rises to glory, annnnnnd your monitors (assuming on stands and not mounted on arms) get ever so slightly tilted then violently pulled back only to plummet to their demise. - I have two large speakers and my PC tower/cart under my desk. I had to make sure at the lowest possible position, the motor would not crush/break or otherwise come in contact with the top of those items. Luckily, the speakers are ~3" away from the bottom of the motor, and the PC is set on the outside, between one of the legs and the wall. If you keep a filing cabinet or some other accessory under the desk, be aware of all elements under the desk's structural components during set-up. - Goes without saying.. Watch for small children and pets when raising and lowering the desk. When the desk achieves the lowest point, there are likely pinch points at the base of each leg.

We purchased the VIVO Electric 60 x 30 inch Standing Desk Workstation along with the 18-inch Under Desk Lockable Slide Out Drawer, and the Dual Monitor Desk Mount. We figured that if we bought everything from the same manufacturer, it would all just work together better than mixing and matching. We are very pleased with the quality of all of the products. The workstation is heavy, well-designed and pretty easy to put together. We thought that with the table length of 60-inches we would be able to mount two of the slide out drawers underneath and bought two. That didn’t work, due to interference by the strong connection brackets for the tabletop, so we had to return one of them. The instruction manual could have bigger print; it was a little hard to red. Also, there are several different sized connectors and a full-size illustration of each screw size would make it easier to tell them apart. The slide out drawer is strong and easy to install. If you order a workstation with a tabletop that comes in two pieces, you might not be able to mount it because of the solid drawer frame top. The dual monitor desk mount is another strong item. We are using it with the clamp-on mount instead of drilling a hole through the workstation table. A single arm holds the monitors, so you can’t move the monitors up and down independent of each other. That didn’t matter to us, especially considering the great price. It would be great if VIVO would market a small, maybe 2 feet tall, file cabinet to complete the ensemble.

Oh dear...... I ordered this as a home-office desk replacement 6 weeks ago, but only managed to free up the space to build it this weekend, therefore missing the returns deadline. It arrived quickly, in 2 reassuringly heavy boxes, so a good start.... I followed the instructions implicitly, as it has to be built "upside down" but all fairly intuitive. The base is of decent heavy gauge steel construction, although I would have liked to see, in addition to the central strut linking the 2 uprights, some outer braces for the desktop itself - more of this later. The motor is fit for purpose, although the drive linkage is moulded plastic, so debatable how long this will last with any sort of extended usage. The major problem(s) is with the desktop itself. Although assembled on a clean carpet, when righted, the top already showed some scuff marks because the finish simply isn't durable enough - and shows every finger mark..... The worst part is construction. It comes in 3 pieces, and although the picture shows this, what is not evident is that the seams are simply connected by a dowel and short strut to hold them together. To make matters worse, the seam edges are champfered for some reason, not flush, so its impossible to get a tight secure and cosmetically pleasing finish. I'm tempted to take the whole thing apart and glue the joints to five more structural rigidity. The top has marked up in 2 days of light use, so I have purchased a large gaming mouse mat to cover the areas that will get the most use.- a solution to a problem I really wasn't expecting from a £250 desk. In conclusion, a decent heavy duty frame, but with a shabby worktop.

Love how easy this was to set up. Also love that I could program presets for the different heights I wanted the desk. This unit makes it very easy to be able to sit or stand at the press of a button, the desk is sturdy and functional, I have 3 monitors and have no worries about them falling over. It is also aesthetically pleasing for an office!!!

Glad I took the color combo. Absolutely beautiful and matches my white and black chair. This vivo table is very sturdy. Took me about an hour to fully set it up with only a screwdriver. I loved that the table top came with predrilled holes which made setting it up with only a screwdriver easier. The surface is laminated and very easy to clean. I particularly love this black top as it’s just easy to maintain. By the way I currently have this setup with a monitor stand that has three monitors. This might be a little pricey than the cheaper ones out there, but the quality is worth it. Plus I didn’t want a table top that had two pieces joined together as most usually do.

Easy setup, Solid structure and motor run smoothly

love this desk. very sturdy and solid. the motor is very quiet. the base and the top come separately.. and don't always arrive on the same day. so I started a return because I thought they had shipped me the wrong desk.. but the top arrived a few days later before the return could finish.