I was not sure if this desk would work with my butcher block without drilling any holes, but it's perfect. It has little silicone or rubber bumpers that hold it in place without easily shifting. I was able to affix the button controls to the frame with a couple of command hooks so it's entirely independent of the butcher block. I do wish it was able to go a bit lower as well. The standing height is perfect, but I like to use it with an exercise ball sometimes and it's just a tad high for that on the lowest setting. The quality is great, it was easy to assemble, it looks beautiful in my space and it's super quiet, plus it's very sturdy at all heights and when going up or down. Nothing shakes even though the butcher block isn't even attached. I would purchase this again without a doubt!

Despite the great reviews, I was a bit skeptical about the quality of a $180 sit/stand desk frame. I was shocked to pick up the box on my front porch and it was VERY heavy, indicating it is probably better quality that I imagined. Assembly: Pretty straight forward for anyone who has assembled shipped furniture before. You build it from the bottom up. Feet attach to the legs, legs connect at the cross bar, desk supports attach to the legs, and desk attaches to the supports. I already had a 29"x59" LINNMON top from Ikea, which is hollow core so I marked where the desk should be, marked where the screw holes are on the desk supports, and installed hollow door anchors where I would attach the desk for extra stability. A couple of the screws that take the hex wrenches are a bit soft so I ended up stripping a couple of them on the final turn into the part. Not going to be fun to take those apart if I ever have to but hopefully that isn't for awhile. That is my only negative experience I had with assembly Quality: All metal exterior parts which are very heavy and sturdy individually. There are more expensive versions of this frame, which VIVO support indicated to me is due to the quality of the internals on the motor itself (plastic on this model vs metal on others). I'm not lifting an extreme amount of weight so I went with the cheap option. The single motor is more than enough to lift the large Ikea hollow desk, two laptops, and two 27" monitors with a metal arm mount (also VIVO, very happy with it as well). When seated, i have my desk at about 30" from the floor. It is sitting on medium pile carpet and there is absolutely no sway at the seated height. When raised to a standing position, it is about 46". There is maybe a half inch of left-to-right sway and about the same forward/backward. The forward and backward sway could be due to mine sitting on carpet where the legs are just swaying on the soft surface but it is enough sway that it shakes my monitors if move the desk too much. The side to side sway is pretty much par for the course with any sit/stand I've used. Overall Pros: * Very solid build quality. The pieces are a heavy-duty solid metal * Speed and strength of the single motor is plenty for a 60" desk with two laptops and two large monitors. * Directions are easy as can be. * Looks very nice. Sharp lines, modern desk feet, jet black color Overall cons: * The slight sway of the desk at its highest can be a bit annoying. It's slightly more than what I've experienced with more expense desks. Could also be due to mine being on carpet * Quality of some of the machine screws and bolts were a bit soft causing me to strip them * The two trays they include for cable management are very small and leave little clearance between the tray and the desk. If you're like me with 20 some cables running around, you'll need a more robust solution Really unbelievable value for what you are getting here. Especially if you've already got a desktop sitting at home that would be compatible, it is a no brainer purchase. At my office we have Herman Miller sit/stand desks that are about the same width as what I've done here and I can only tell there is a slight dip in quality. Certainly not a $1400 dip in quality which is about the price difference there. Highly, highly recommend this. Only regret is that I didn't buy this when I started working from home 11 months ago.

Current Situation I have an Elfa closet system in my 3' x 6' closet where I've setup a tiny office. This includes a 30" wide x 20" deep Elfa stationary desk. Problem I'm tired of just sitting all day long. I was trying to find a compact adjustable height desk but limited options are out there for that small of a size. Herman Miller had a perfect one that was $1400 with a table top, but that was a steep price to pay because I didn't want the mistake of paying that much to find out I couldn't get the desk inside the closet or the specs were off by even a 1/4 of an inch. Solution I found this Vivo online for only $300. I love the fact you could make it as wide or narrow as you want which really gave me a lot of flexibility to make this system work in my closet. I also have an existing table top that I could use. At a 1100 savings, it was worth the risk. Outcome It was amazingly perfect. The material is solid steel. Boy this thing is heavy. It looks great too! And it took me less than 45 minutes to put it together. Would have been shorter, but this included the time to unbox and cleanup. Helpful Tips - If you're looking for a narrow table top, I would suggest going to the Container store and look at their Elfa desk options. Ikea is another place to find some nice table tops. Or just make your own. - I didn't screw my table top in. There are rubber feet on the steel bars that are extremely grippy. This saved me at least 20-30 minutes of not having to make holes in my table and screw it on. It doesn't slip or move at all. Solid!!! So happy I purchased this and glad I didn't spend $1400 for something that was overkill. Still shocked this is >1000 cheaper.

Sit stand desk frame working well, motor runs smoothly and quietly. Customer support was quick and responsive when I contacted them with a question.

Creo que lo mas importante entre todas las buenas características que tiene este escritorio es la calidad de sus materiales, esto hace que sea un escritorio robusto, los tubos son de calibre grueso, y están pintados con pintura horneada por lo que la durabilidad esta asegurada por años además que esto lo hace muy estable, se siente la calidad desde que sacas las piezas de su caja, el armado fue rápido y sencillo, el motor hace su función sin problemas, el escritorio se ajusta a lo largo por lo que se adapta perfectamente a cualquier espacio, y el hecho de que no venga con la mesa desde mi punto de vista es mejor porque así puedes ponerle cualquier tabla del tamaño que necesites y el color que quieras, yo trabajo en línea y estoy sentado tooooooooodo el día y con este escritorio puedo estar de pie y seguir trabajando para descansar mis nachitas, creo que este tipo de escritorios esta enfocado a personas como yo que trabajamos sentados muuuucho tiempo, tal vez alguien que se sienta en la compu unas 2 horas al día no le vera ninguna ventaja, el precio actual se me hace justo, lo había estado cazando desde hace tiempo pero se me hacia un poco caro, afortunadamente han bajado el precio en el ultimo año y hoy Junio de 2023 el precio es de $3999 (+$300 aprox. que gaste en la tabla) lo cual es bastante aceptable tomando en cuenta la calidad de los materiales y la función mecánica y la versatilidad de adaptarse a las necesidades de tamaño lo hacen una mejor opción a cualquier escritorio común, en resumen ha sido una excelente compra, si necesitas esta versatilidad no dudes en comprar esta marca, es la mas económica en el sitio y aun así la calidad es excelente.

Me gustó mucho el material, se ve de buena calidad, resistente y fácil de armar. Muy sólido ya que pesa bastante

easy to install, works great. I used a 1600 x 750 x 28 solid wood desk top with no issue, no wobble. very quite. happy with the purchase

Very satisfied ! It is sturdy and well made. It took me only 20 minutes to set up.