product image
product image preview
product image preview
product image preview
product image preview
product image preview
product image preview

WALI Single Monitor Arm, Gas Spring Mount up to 49 inches, Ultrawide Monitor Arm Holds up to 44lbs, Heavy Duty Desk Mount with C Clamp and Grommet Base (GSM001XL-P), Black

79.99

Other platform prices

WALI Single Monitor Arm, Gas Spring Mount up to 49 inches, Ultrawide Monitor Arm Holds up to 44lbs, Heavy Duty Desk Mount with C Clamp and Grommet Base (GSM001XL-P), Black

4.5

Highest ranking 101

11 comments

$79.99

Other platform prices

· Compatibility: The single monitor arm fits ultrawide or curved LCD/LED screen from 17” to 49”. The two-stage locking system is compatibility for 0.47"-2" thick desk for both C-clamp and Grommet Base · Adjust: Wali monitor mount easily with quick detach Mounting plate and hide messy wires with built-in cable management · Sturdy Construction: Single monitor stand made high-grade material gas spring arm can be extended and retracted, +50°/-20° tilt and +90°/-90° swivel to change reading angles, and 180° rotate from landscape to portrait mode · Double Benefits: Double efficiency and productivity by opening up desk space allowing a new range of adaptable positions for your displays, ergonomically correct position to reduce neck and eye strain · Package includes: 1 x WALI Gas Spring Single Monitor Desk Mount, Mounting Hardware Kit, User Manual, experienced and friendly US based customer support available to assist 7 days a week

Related products

Reviews From
avatar

JeffReviewed in the United States on March 30, 2024

Upgraded my multi monitor setup with Samsung Odyssey G9 49” Ultra Wide. My old Wali mount worked, but the weight capacity was only 17lbs and its long term capability was questionable, to avoid any issues, I found this heavy duty wali mount for $100. Way less $$ than others. Don’t waste your money on anything else. This monitor mount is solid and very nice quality, the tilt adjustment is a heavy duty spring which was exactly needed for larger and heavier monitors. It’s clear Wali did their research and knew what customers would need. I installed in less than 15 minutes, I’m not sure what other reviews mean when they say it’s complicated or too difficult to install. If you can build a simple Lego set and read, you’ll have this installed in moments. Some people say you need 2 people to hang the monitor, not sure again what the issue is. With this mount I hung it alone, it has a nice slide mount with tilt locking, just had to look under the monitor to line it up. I did not adjust any tensioners before hand, you will need to adjust the main arm about 3 - 5 revolutions, and the tilt tensioner will also need to be turned a few times. Just make sure when you mount the monitor, don’t let it go, ease it down onto desk in case. Also make sure your desk is clear of stuff. All in all, glad I didn’t spend a fortune and a $100 investment for a $1k monitor is worth it. Sleek and easy to move around, love it. Thanks Wali.

avatar

Lee MReviewed in the United States on May 7, 2025

Works great, wish I got it earlier. Its nice being able to adjust my monitor to different positions as needed. Good quality, seems strong. I use it with my standing desk. Holds the position I set it to very well. I have a 49” Samsung Curved monitor that I use this arm with.

avatar

SLReviewed in the United States on February 22, 2025

I ordered a Secret Labs Magnus Pro desk and due to the desk design, it requires monitor arms that tighten from the top, this one seem to fit the bill. Great news is, it works perfect with my new desk. I ordered two, one for my 49" ultrawide and one for my 28" 4K monitor. It worked perfect for the 28" monitor right out of the box, for the 49", the arm immediately dropped to the bottom when I placed the monitor on it. I thought to myself that this monitor arm might not be strong enough to hold the weight but it was "advertised" that it would. I found the tension adjustment and after a few turns, it now supports the full weight of my 49" ultrawide as well. Obviously not a long term review as I just got these in but so far, I am very pleased with them. If they hold up to daily use and movement, I will be thrilled. Highly recommended!

avatar

TimReviewed in the United States on January 11, 2025

I've now been using this arm for about a year now. So, far this has been the best monitor arm I've ever used. The setup and adjustment was easy. Once completed, it stays where you put it. Even my heavy Dell 49" wide screen monitor is almost weightless once the spring is adjusted properly. It does take a considerable amount of adjustment to get to this point, but once there, it stays there. Because we are talking about almost 36 lbs. of monitor on the end of an arm, there is some expected wiggle when bumped, but it does not move unless you want it to. I'm very happy with buying this arm.

avatar

G VarelaReviewed in the United States on February 23, 2024

So, it appears to be a straightforward installation. I thought, "No trouble" , but boy was i wrong. First off, the piece that tightens the arm to the base is this extremely small and unique screw that can be easily lost if you're not paying attention, but can not be easily replaced for there is no other piece like it.. .SO why have that part of your unit?? The bigger problem was the actual backplate that connects to the arm, that is used to support the monitor, came mounted INCORRECTLY... it would not sit flush and would only veer upwards, so the monitor was always veered towards the ceiling.. I had to unscrew and take that part off the arm, take out the inner bearings, and reseat it properly... This, i find extremely unacceptable. Not everyone could manage this, and I can easily seeing many people returning this unit if this came this way. Once i got these matters sorted out and installed it, it's a beauty, and can easily hold the weight of my LG C3 42 inch... So i would say the build is solid, great material, good metal, strong piston. Just be aware that it might be more than you anticipated to set it up.

avatar

JustinReviewed in the United States on February 1, 2025

nice and sturdy ,smooth and stays put with my samsung 32" . mounts to the edge or center of dest just make sure you have a good thickness.

avatar

ChristopherReviewed in the United States on January 17, 2025

bought this to hold a ROG Swift OLED PG39WCDM. The head tilt slips and angles the monitor down. It can't keep the monitor level.

avatar

Tracy MReviewed in the United States on August 5, 2024

I needed a better solution as I had moved my desk into a smaller space. This was one of the few monitor arms that could accommodate a monitor this big. It was a little tricky getting the monitor attached and adjusted. Once attached I had to adjust the tension so that monitor wasn't just resting on the desk. Once completed, I had full range of motion.

avatar

CMaxwellReviewed in the United Kingdom on March 21, 2025

Really great item, very sturdy and stable. Follow the instructions and your installation should be fine. I have used it to mount a 48 inch OLED TV at 15kg with no issues whatsoever.

avatar

Christian Alexander Tapia MáynezReviewed in Mexico on April 6, 2024

Es perfecto sencillamente, soporta a la perfección un ultrawide de 34 pulgadas y es fácil de instalar, me quedo sin palabras, super recomendado.

avatar

TafadzwaReviewed in the United Kingdom on April 1, 2025

Works for my 39inch curved monitor. Holds it in place